[Aug 21, 2026] Valid 350-601 Test Answers & 350-601 Exam PDF [Q185-Q204]

Posted On August 21, 2026

[Aug 21, 2026] Valid 350-601 Test Answers & 350-601 Exam PDF

Valid CCNP Data Center 350-601 Dumps Ensure Your Passing

Cisco 350-601 (Implementing Cisco Data Center Core Technologies) certification exam is designed for professionals who wish to demonstrate their skills in implementing and managing complex data center solutions. 350-601 exam tests the candidate’s knowledge of technologies and best practices involved in data center design, implementation, and operation. Successful completion of the exam leads to the award of the Cisco Certified Specialist – Data Center Core certification.

QUESTION 185
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?

Option A

Option B

Option C

Option D

QUESTION 186
A network engineer is configuring the Cisco UCS service profile template with Ansible using this code.

Which attribute must be used to apply the iSCSI initiator identifiers to all iSCSI vNICs for the service profiles derived from the service template?

san_connectivity_policy

iqn_pool

boot_policy

lan_connectivrty_policy

QUESTION 187
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)

syslog redirection

DNS servers

SMTP servers

NTP servers

SMTP reply-to-address

Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_gui_cisco_intergight_management.html

QUESTION 188
Drag and Drop Question
An engineer deploys a custom guest shell rootfs onto multiple switches.
Drag and drop the steps from the left into the correct order on the right.

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammabi lity/guide/b-cisco-nexus-9000-series-nx-os-programmability-guide-93x/b-cisco-nexus-9000- series-nx-os-programmability-guide-93x_chapter_0100.html

QUESTION 189
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?

install all kickstart<image>system<image>

install all kickstart <image>system<image>parallel

install all epld bootflash:<image>

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/upgrade/guide/ cisco_nexus7000_software_upgrade_and_downgrade_guide_8x.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/7_x/nx-os/upgrade/guide/ b_Cisco_Nexus_7000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7- x.html#d54e307a1635

QUESTION 190
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?

Option A

Option B

Option C

Option D

QUESTION 191
A company is investigating different IT automation tools. The IT team has experience with the Python programming language and scripting using a declarative language. The proposed tool must be easy to set up and must not require an agent to be installed on target devices. The team must also be able to create custom Python modules to extend the tool’s functionality. Which automation tool meets these requirements?

NX-API

Chef

Ansible

Puppet

Ansible is an agentless automation and configuration-management platform. It normally connects to managed network devices through protocols such as SSH, NETCONF, or HTTP APIs, eliminating the requirement to install an agent on each target. Ansible playbooks use YAML, a human-readable declarative language that describes the desired configuration state. Its modules are primarily developed in Python, allowing the engineering team to create custom modules when built-in functionality is insufficient. Chef and Puppet traditionally use agent-based architectures in which software runs on managed nodes, making them inconsistent with the agentless requirement. NX-API is a programmable interface provided by Cisco NX-OS; it can execute commands and return structured data, but it is not a complete configuration-management platform offering declarative playbooks, inventory management, and extensible automation modules.

QUESTION 192
Which component is excluded by default from the host firmware package?

network interface controller

local disk

board controller

storage controller

QUESTION 193
Refer to the exhibit.

An engineer runs a Python script from a newly enabled guest shell on a Cisco Nexus 93108 Series Switch. The script needs an additional package called “Markdown” installed from the Python package manager. Which set of tasks must the engineer perform to install the required package?

Set the NAMESERVER variable in /etc/sysconfig/network. Clone the Markdown repository with the git clone command.

Add nameserver configuration to /etc/resolv.conf. Run sudo chvrf management pip install Markdown.

Enable ip domain-lookup in startup-config. Enter python install Markdown as root.

Configure ip name-server in configuration mode. Execute sudo yum -y install Markdown.

QUESTION 194
Which two statements about modifying Cisco UCS user accounts are true? (Choose two.)

Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.

The admin account can be used to log on by using SSH only.

The password of the user account must contain a minimum of 10 characters.

Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.

The password of the user account expires in 30 days.

A locally authenticated user account is authenticated directly through the fabric interconnect and can be enabled or disabled by anyone with admin or aaa privileges. After a local user account is disabled, the user cannot log in. The database does not delete the configuration details for disabled local user accounts. If you re-enable a disabled local user account, the account becomes active with the existing configuration, including the username and password.
A remotely authenticated user account is any user account that is authenticated through LDAP, RADIUS, or TACACS+.
If a user maintains a local user account and a remote user account simultaneously, the roles defined in the local user account override those maintained in the remote user account.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Admin-Management/3-
1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html

QUESTION 195

Refer to the exhibits An engineer must implement a SPAN session that sends a copy of all VLAN 11 traffic on N5K_1 to the Traffic Capturing Device The configuration that is presented is already applied to the Cisco UCS Manager. Which additional action meets the objective?

Assign the VLAN to the monitored port.

Choose VLAN 11 under the VSANs section.

Select the Clear Destination feature.

Create a LAN traffic monitoring session.

QUESTION 196
What is a recommended design choice in a topology for multipathing iSCSI traffic?

single initiator to dual targets

initiators and targets in separate subnets

dual initiators to a single target with bonded interfaces

two NICs bended together on the initiator

Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/ system_management/configuration/guide/n1000v_system/n1000v_system_13iscsi.html#wp1052813

QUESTION 197
An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus
5600 Series switch?

Errors are skipped when an atomic rollback type is triggered.

A user who is assigned to the network-operator user role can perform a rollback.

The configuration rollback functionality is disabled when FCoE is enabled.

A system checkpoint is generated automatically when the running configuration is saved to NVRAM.

The statement that applies to a Cisco Nexus 5600 Series switch when performing a rollback is that errors are skipped when an atomic rollback type is triggered. An atomic rollback is a type of rollback that implements the checkpoint configuration only if no errors occur during the process. If any errors are encountered, the rollback is aborted and the running configuration is restored to its previous state. This ensures that the switch does not end up in a partially configured or inconsistent state. The other statements are not true because:
* A user who is assigned to the network-operator user role cannot perform a rollback. The network-operator user role has read-only access to the switch and cannot modify the configuration. To perform a rollback, the user must have the network-admin or vdc-admin user role.
* The configuration rollback functionality is not disabled when FCoE is enabled. The rollback feature is supported on all Cisco Nexus 5600 Series switches regardless of the FCoE configuration. However, some FCoE-related commands may not be rolled back due to dependencies or conflicts with other features.
* A system checkpoint is not generated automatically when the running configuration is saved to NVRAM. A system checkpoint is a predefined checkpoint that contains the last saved configuration of the switch. A system checkpoint is created or updated only when the user explicitly saves the running configuration to the startup configuration using the copy running-config startup-config command or its alias, copy run start. References: For more details on how to configure and use the rollback feature on a Cisco Nexus 5600 Series switch, please refer to the following resources:
* Configuring Rollback
* Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
* Cisco Nexus 5600 Series NX-OS System Management Command Reference

QUESTION 198
Refer to the exhibit.

A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server.
Which configuration must be added on the remote OTV AEDs site?

Option A

Option B

Option C

Option D

QUESTION 199
Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)

EPLDs can be upgraded only to the latest EPLD image.

EPLD upgrades can be completed without powering down the module during the upgrade.

An upgrade verification identifies the impact of each EPLD upgrade.

The EPLDs for all the modules on a switch must be upgraded at the same time.

EPLDs can be upgraded without replacing the hardware.

QUESTION 200
Host1 is in VLAN100 located in DataCenter1 and Host2 is in VLAN200 located in DataCenter2.
Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

Option A

Option B

Option C

Option D

QUESTION 201
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. What configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?

fcoe fcf-priority 512

fcoe fcf-priority 1024

fcoe fcf-priority 0

no fcoe fcf-priority

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/521n11/b_5k_FCoE_Config_521N11/ b_5k_FCoE_Config_521N11_chapter_011.pdf

QUESTION 202
A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)

Service Profile Compute (Is-compute)

Ext LAN Config (ext-lan-security)

Service Profile Network Policy (Is-network-policy)

Service Profile Config (Is-config)

Ext LAN Policy (ext-lan-policy)

The new employee needs to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Option B, Ext LAN Config (ext-lan-security), grants privileges to configure external LAN connectivity settings including VLANs. Option D, Service Profile Config (Is-config), allows for configuring service profiles including NTP synchronization settings. References
:
* Cisco UCS Manager GUI Configuration Guide, Release 4.0 – Configuring User Accounts and Organizations [Cisco UCS Manager], Configuring User Accounts and Organizations, Configuring Roles
* Cisco UCS Manager CLI Configuration Guide, Release 4.0 – Configuring User Accounts and Organizations [Cisco UCS Manager], Configuring User Accounts and Organizations, Configuring Roles

QUESTION 203
Which data structure results from running this Python code?

tuple

dictionary

set

list

QUESTION 204
Refer to the exhibit. A network engineer uses Ansible to automate the provisioning of different ACI tasks. The current design requires that each application profile has a single EPG. All application EPGs must belong to the same configured bridge domain. Which set of actions must be taken to accomplish this goal?

To achieve the desired outcome, where each application profile has a single EPG and all application EPGs belong to the same configured bridge domain (BD):
Add line ap: App{{item}}under the create epgtask: This ensures that each EPG is correctly associated with an application profile dynamically based on the variable item. This is crucial to establish the association between each EPG and its corresponding application profile.
Add line with_sequence: start=1 end=100under the create aptask: This creates a loop that allows for the creation of multiple application profiles in sequence, from 1 to 100. This helps automate the creation of multiple application profiles, each with a unique number.

Loading …

Cisco 350-601 exam covers a wide range of topics, including network infrastructure, virtualization, storage network, automation, and security. Candidates are expected to have a thorough understanding of these topics and demonstrate their ability to implement and manage them in a data center environment. 350-601 exam also tests the candidates’ knowledge of Cisco’s data center technologies, such as Cisco Application Centric Infrastructure (ACI) and Cisco Unified Computing System (UCS).

350-601 Dumps Real Exam Questions Test Engine Dumps Training: https://www.exams4sures.com/Cisco/350-601-practice-exam-dumps.html