This page was exported from Best Free Exam Guide [ http://free.exams4sures.com ] Export date:Fri Mar 14 21:20:40 2025 / +0000 GMT ___________________________________________________ Title: [Nov 05, 2024] Latest CCNP Security 300-730 Actual Free Exam Questions [Q88-Q107] --------------------------------------------------- [Nov 05, 2024] Latest CCNP Security 300-730 Actual Free Exam Questions CCNP Security 300-730 Dumps Updated Practice Test and 208 unique questions Cisco 300-730 exam is a highly sought-after certification for IT professionals who specialize in VPN technologies. 300-730 exam is designed to test the candidate's skills in deploying, managing, and troubleshooting VPNs using Cisco technologies. 300-730 exam covers a broad range of topics, including VPN technologies such as SSL VPN, AnyConnect, and FlexVPN, as well as advanced security features such as threat detection, intrusion prevention, and more. Cisco 300-730 certification exam is a professional-level exam designed to test the knowledge and skills of IT professionals in implementing secure solutions with virtual private networks (VPNs). Implementing Secure Solutions with Virtual Private Networks certification exam is ideal for IT professionals who work with VPNs and are looking to enhance their skills and knowledge in implementing secure solutions. 300-730 exam is part of the Cisco Certified Network Professional (CCNP) Security certification track.   NEW QUESTION 88Two Cisco ASAs are set up in a VPN load-balancing configuration in an environment where there are thousands of unique Cisco AnyConnect connections per day. Which scalable IP address assignment method must be implemented on both ASAs to achieve minimal overlap when assigning IP addresses from the same subnet to AnyConnect clients?  DHCP  local  RADIUS framed IP address  RADIUS address pools NEW QUESTION 89What is a requirement for smart tunnels to function properly?  Java or ActiveX must be enabled on the client machine.  Applications must be UDP.  Stateful failover must not be configured.  The user on the client machine must have admin access. Section: Secure Communications ArchitecturesExplanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.htmlNEW QUESTION 90The corporate network security policy requires that all internet and network traffic must be tunneled to the corporate office. Remote workers have been provided with printers to use locally at home while they are remotely connected to the corporate network. Which two steps must be executed to allow printing to the local printers? (Choose two.)  Configure the split-tunnel-policy on the Cisco ASA to tunnelall.  Check the Allow Local LAN access checkbox in the Cisco AnyConnect client.  Add a persistent static route in the client OS for the local LAN network.  Configure the split-tunnel-policy on the Cisco ASA to excludespecified.  Configure the split-tunnel-policy on the Cisco ASA to tunnelspecified. https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70847-local-lan-pix-asa.htmlNEW QUESTION 91Refer to the exhibit. Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.Which command on the ASA is missing?  dns-server value 10.1.1.2  same-security-traffic permit intra-interface  same-security-traffic permit inter-interface  dns-server value 10.1.1.3 NEW QUESTION 92Refer to the exhibit.DMVPN spoke-to-spoke traffic works, but it passes through the hub, and never sends direct spoke-to-spoke traffic. Based on the tunnel interface configuration shown, what must be configured on the hub to solve the issue?  Enable NHRP redirect.  Enable split horizon.  Enable IP redirects.  Enable NHRP shortcut. NEW QUESTION 93Refer to the exhibit.Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.Which command on the ASA is missing?  dns-server value 10.1.1.2  same-security-traffic permit intra-interface  same-security-traffic permit inter-interface  dns-server value 10.1.1.3 The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.NEW QUESTION 94Which DMVPN feature allows spokes to be deployed with dynamically assigned public IP addresses?  2547oDMVPN  NHRP  OSPF  NAT Traversal NEW QUESTION 95Refer to the exhibit.Given the output of the show ip route command, which remote access VPN technology is in use?  Reverse Route Injection  FlexVPN  Dynamic Crypto Map  DMVPN NEW QUESTION 96Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used. Reference:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.htmlNEW QUESTION 97Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?  FlexVPN  DMVPN Phase 3  DMVPN Phase 2  GETVPN NEW QUESTION 98Which is used by GETVPN, FlexVPN and DMVPN?  NHRP  MPLS  GRE  ESP NEW QUESTION 99A network administrator deployed IKEv2 Cisco AnyConnect on a Cisco ASA. The current configuration tunnels all traffic through the VPN. Users report poor performance with cloud-based applications, but no issues have been reported about connections to on-premises servers. Packet analysis on Cisco Webex traffic shows very few duplicate ACKs, high RTT, and no IP fragments.Which action improves Webex performance for VPN users?  Configure QoS on the outside interface of the ASA.  Configure Cisco AnyConnect to use DTLS.  Configure a dynamic split tunnel exclusion.  Reduce the Cisco AnyConnect tunnel MTU. NEW QUESTION 100Refer to the exhibit.An engineer is diagnosing an issue that occurred after a router at a branch site was assigned a new address. Based on the debugs, what must be done to resolve this issue?  Add the remote peer’s IP address to the server’s IKEv2 keyring.  Ensure that the correct preshared keys are set on both sides.  Ensure that the UDP 500 packets between devices are not dropped.  Add the remote peer’s identity to the server’s IKEv2 profile. NEW QUESTION 101Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?  The XML profile is not configured correctly for the affected users.  The new client image does not use the same major release as the current one.  Client services are not enabled.  Client software updates are not supported with IKEv2. On ASDM, under connection profile -> access interfaces -> IPSEC (IKEv2) Access : you can check or uncheck the boxes for “allow access” and “enable client access”.NEW QUESTION 102In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?  Verify the spoke configuration to check if the NHRP redirect is enabled.  Verify that the spoke receives redirect messages and sends resolution requests.  Verify the hub configuration to check if the NHRP shortcut is enabled.  Verify that the tunnel interface is contained within a VRF. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec- conn-dmvpn-15-mt-book/sec-conn-dmvpn-summ-maps.pdfNEW QUESTION 103Refer to the exhibit. Which type of VPN implementation is displayed?  IKEv1 cluster  IKEv2 backup gateway  IKEv2 load balancer  IKEv2 reconnect https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-16-10/sec- flex-vpn-xe-16-10-book/sec-cfg-clb-supp.htmlNEW QUESTION 104Refer to the exhibit. Which component must be configured on routers for a GETVPN deployment work properly?  PE3: Key Server – Customer 2 CEs: Group Members  Customer 1 CE1: Key Server – R1 and Customer 1 CE2: Group Members  R1: Key Server – Customer 1 CEs: Group Members  PE3: Key Server – all CEs: Group Members NEW QUESTION 105Which method dynamically installs the network routes for remote tunnel endpoints?  policy-based routing  CEF  reverse route injection  route filtering Reverse route injection (RRI) is a method that dynamically installs the network routes for remote tunnel endpoints. The RRI feature allows the router to automatically learn the routes for the remote networks and automatically install these routes into the routing table. This eliminates the need for the administrator to manually configure and maintain the routes for the remote networks. This feature is commonly used in VPN environments, where the router at the VPN endpoint needs to learn the routes for the remote networks behind the other VPN endpoint. The other options such as policy-based routing, CEF, and route filtering are not used to dynamically install the network routes for remote tunnel endpoints Reference:NEW QUESTION 106An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?  SBL with user certificate authentication  TND with machine certificate authentication  SBL with machine certificate authentication  TND with user certificate authentication Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network). https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236NEW QUESTION 107Which technology and VPN component allows a VPN headend to dynamically learn post NAT IP addresses of remote routers at different sites?  DMVPN with ISAKMP  GETVPN with ISAKMP  DMVPN with NHRP  GETVPN with NHRP  Loading … Verified 300-730 dumps Q&As - 100% Pass from Exams4sures: https://www.exams4sures.com/Cisco/300-730-practice-exam-dumps.html --------------------------------------------------- Images: https://free.exams4sures.com/wp-content/plugins/watu/loading.gif https://free.exams4sures.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-11-05 13:09:53 Post date GMT: 2024-11-05 13:09:53 Post modified date: 2024-11-05 13:09:53 Post modified date GMT: 2024-11-05 13:09:53