This page was exported from Best Free Exam Guide [ http://free.exams4sures.com ] Export date:Sat Mar 15 6:40:34 2025 / +0000 GMT ___________________________________________________ Title: HPE6-A72 Exam Dumps Pass with Updated 2023 Certified Exam Questions [Q22-Q41] --------------------------------------------------- HPE6-A72 Exam Dumps Pass with Updated 2023 Certified Exam Questions HPE6-A72 Exam Questions - Real & Updated Questions PDF HPE6-A72 Exam is an excellent opportunity for IT professionals who want to specialize in Aruba Certified Switching Associate. Aruba Certified Switching Associate Exam certification is globally recognized and can open up numerous career opportunities in different industries. HPE6-A72 exam covers a range of topics, including basic switch configuration, VLANs, link aggregation, and spanning tree protocol. With the right preparation, IT professionals can pass the exam and acquire the skills and knowledge necessary to manage and configure ArubaOS-Switches effectively.   Q22. Interface 1/1/1 is upAdmin state is upLink transitions: 1Description: TO_PC-1Hardware: Ethernet, MAC Address: 00:11:22:33:44:55MTU 1500Type 1GbTFull-duplexqos trust noneSpeed 1000 Mb/sAuto-negotiation is onFlow-control: offError-control: offMDI mode: MDIXVLAN Mode: accessAccess VLAN: 1111Which command will produce the above output?  show interface vlan 1111  show interface 1/1/1  show interface gigabit 1/1/1  show vlan 1111 Q23. Refer to the exhibit.The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.Which ports carry VLAN 1 traffic?  1/1/8, 1/1/10, 1/1/5-1/1/24  1/1/1-1/1/28  1/1/1-1/1/24  1/1/8-1/1/10, 1/1/5-1/1/28 Q24. The following command is issued:Switch# checkpoint rollback startWhat is the result?  The command will fail because rollback commands must be issued from global-config mode.  The switch will revert the running-configuration to the checkpoint called ‘start1 without a reboot.  The command will fail because it is incomplete.  The switch will use the checkpoint ‘rollback1 as the starting configuration on next reboot. Q25. Refer to the exhibit.The above output is the result of issuing the command show system resource-utilization.What command should be used to enable terminal output line by line or page by page?  The command page  The command terminal length 30  The command more  The command less Q26. Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?  UDP 1812 and UDP 1813  UDP 161  TCP 443  UDP 162 Q27. The section in blue can be ignored.SW1(config)# interface 1/1/1-1/1/2SW1(config-if-<1/1/1-1/1/2)# vlan access 2SW1(config-if-<1/1/1-1/1/2)# exitSW1(config)# interface 1/1/11-1/1/17SW1(config-if-<1/1/11-1/1/17)# vlan access 17SW1(config-if-<1/1/11-1/1/17)# exitAfter completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?         Q28. Which two statements accurately describe stacking with Aruba switches? (Choose two.)  A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.  VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.  The VSF feature is not compatible between AOS-CX and AOS platforms.  A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.  VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models. Q29. Review the exhibit.As the frame traverses from **PC-1** to **Server-1**, the VLAN tag will be removed.Click on the interface (circled in green) where the VLAN tag will be removed. Q30. Refer to the exhibit.Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.Which configuration will correct the issue?  Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREENHost-B: assign the default-gateway address 10.1.20.181  Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.181  Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.1  Host-B: assign the default-gateway address 10.1.20.181 Q31. Refer to the exhibit.What command will display the debug l2mac events?  show module L2MAC  show debug terminal  show debug buffer module L2MAC  show debug all Q32. With what other technology does Half Duplex communication closely match?  a pair of fiber optic strands allowing transmit on one and receive on the other at the same time  a mobile phone call  point-to-point connections between two switches allowing concurrent transmit and receive  CB radio using push-to-talk Q33. What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?  copy running-config checkpoint startup-config  copy startup-config running-config  copy running-config initial-checkpoint  copy running-config default Q34. Refer to the exhibit.The Aruba 8400 in the exhibit is member 2 of a VSX stack.Which command will enter the interface sub configuration mode for the port, indicated by the orange square?  8400(config)# interface 2/4/15  8400(config)# interface 1/7/16  8400(config)# interface 1/4/15  8400(config)# interface 2/3/17 Q35. Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?  Protocol  IHL  TTL  Identification Q36. Refer to the exhibit.Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?  11010101  10110001  01001011  11111000 Q37. What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?  Better Core router performance by offloading processing  Shifting endpoint access to the Aggregation layer from the Access layer  Using access control lists (ACLs) at the Core to improve performance  Connecting WAN/MPLS and Data center access to the Aggregation layer Q38. Which command can be used to find the serial number of an Aruba OS-CX switch?  The command inventory  The command version  The command show running-configuration  The command show system Explanation/Reference:Q39. Refer to the exhibit.All four switches in the diagram have been configured with the region name “Aruba1”.What two other MSTP configurations must match for switches within the same MST region? (Choose two.)  MST region type  MST Bridge ID  MST version number  MST revision number  MST VLAN to instance mapping Q40. Which statement is correct regarding powering an Aruba Access Point?  PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.  Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.  PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.  Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP. Q41. SW1(config)# interface 1/1/1-1/1/2SW1(config-if-<1/1/1-1/1/2)# vlan access 2SW1(config-if-<1/1/1-1/1/2)# exitSW1(config)# interface 1/1/11-1/1/17SW1(config-if-<1/1/11-1/1/17)# vlan access 17SW1(config-if-<1/1/11-1/1/17)# exitAfter completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?  Option A  Option B  Option C  Option D  Loading … Pass Guaranteed Quiz 2023 Realistic Verified Free HP: https://www.exams4sures.com/HP/HPE6-A72-practice-exam-dumps.html --------------------------------------------------- Images: https://free.exams4sures.com/wp-content/plugins/watu/loading.gif https://free.exams4sures.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-12-30 09:53:11 Post date GMT: 2023-12-30 09:53:11 Post modified date: 2023-12-30 09:53:11 Post modified date GMT: 2023-12-30 09:53:11