Prepare For Realistic NSE8_812 Dumps PDF – 100% Passing Guarantee [Q14-Q35]

Posted On December 13, 2023

Prepare For Realistic NSE8_812 Dumps PDF – 100% Passing Guarantee

Check the Available NSE8_812 Exam Dumps with 62 Q’s

Fortinet NSE8_812 exam, also known as the Fortinet NSE 8 – Written Exam, is a certification exam that measures the knowledge and skills of candidates in designing, implementing, and managing complex security solutions using Fortinet products. It is the highest-level certification offered by Fortinet, and passing NSE8_812 exam is a requirement for becoming a Fortinet Network Security Expert (NSE) 8.

Fortinet NSE8_812 exam is a challenging certification exam that requires extensive preparation and study. NSE8_812 exam is designed to test the skills and knowledge of network security professionals who are responsible for securing enterprise-level networks. NSE8_812 exam is also designed to test the ability of network security professionals to troubleshoot complex security issues. NSE8_812 exam covers a wide range of topics, including network security, firewall technologies, VPN technologies, intrusion prevention and detection, and network security management. Candidates who pass the exam will be awarded the Fortinet NSE8_812 certification, which is highly valued in the industry.

NEW QUESTION 14
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

API

FTP

SCP

Report

NEW QUESTION 15
An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

600ms

200ms

300ms

100ms

NEW QUESTION 16
Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)

B)

Option A

Option B

Option C

Option D

NEW QUESTION 17
A remote IT Team is in the process of deploying a FortiGate in their lab. The closed environment has been configured to support zero-touch provisioning from the FortiManager, on the same network, via DHCP options. After waiting 15 minutes, they are reporting that the FortiGate received an IP address, but the zero-touch process failed.
The exhibit below shows what the IT Team provided while troubleshooting this issue:

Which statement explains why the FortiGate did not install its configuration from the FortiManager?

The FortiGate was not configured with the correct pre-shared key to connect to the FortiManager

The DHCP server was not configured with the FQDN of the FortiManager

The DHCP server used the incorrect option type for the FortiManager IP address.

The configuration was modified on the FortiGate prior to connecting to the FortiManager

NEW QUESTION 18
Refer to the exhibit showing an SD-WAN configuration.

According to the exhibit, if an internal user pings 10.1.100.2 and 10.1.100.22 from subnet 172.16.205.0/24, which outgoing interfaces will be used?

port16 and port1

port1 and port1

port16 and port15

port1 and port15

NEW QUESTION 19
A customer’s cybersecurity department needs to implement security for the traffic between two VPCs in AWS, but these belong to different departments within the company. The company uses a single region for all their VPCs.
Which two actions will achieve this requirement while keeping separate management of each department’s VPC? (Choose two.)

Create a transit VPC with a FortiGate HA cluster, connect to the other two using VPC peering, and use routing tables to force traffic through the FortiGate cluster.

Create an 1AM account for the cybersecurity department to manage both existing VPC, create a FortiGate HA Cluster on each VPC and IPSEC VPN to force traffic between the VPCs through the FortiGate clusters

Migrate all the instances to the same VPC and create 1AM accounts for each department, then implement a new subnet for a FortiGate auto-scaling group and use routing tables to force the traffic through the FortiGate cluster.

Create a VPC with a FortiGate auto-scaling group with a Transit Gateway attached to the three VPC to force routing through the FortiGate cluster

NEW QUESTION 20
Refer to the exhibits.

The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.
Given this information, which statement is correct?

The ethertype values of the HA packets are 0x8890, 0x8891, and 0x8892

The cluster mode can support a maximum of four (4) FortiGate VMs

The cluster members are on the same network and the IP addresses were statically assigned.

FGVMEVLQOG33WM3D and FGVMEVGCJNHFYI4A share a virtual MAC address.

NEW QUESTION 21
An automation stitch was configured using an incoming webhook as the trigger named ‘my_incoming_webhook’. The action is configured to execute the CLI Script shown:

NEW QUESTION 22
Refer to the exhibit.

The exhibit shows two error messages from a FortiGate root Security Fabric device when you try to configure a new connection to a FortiClient EMS Server.
Referring to the exhibit, which two actions will fix these errors? (Choose two.)

Verify that the CRL is accessible from the root FortiGate

Export and import the FortiClient EMS server certificate to the root FortiGate.

Install a new known CA on the Win2K16-EMS server.

Authorize the root FortiGate on the FortiClient EMS

NEW QUESTION 23
Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer’s requirements?

1x FortiSwitch 248EFPOE

2x FortiSwitch 224E-POE

2x FortiSwitch 248E-FPOE

2x FortiSwitch 124E-FPOE

The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer’s requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer’s requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Reference: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

NEW QUESTION 24
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

OCSP checks will always go to the configured FortiAuthenticator

The OCSP check of the certificate can be combined with a certificate revocation list.

OCSP certificate responses are never cached by the FortiGate.

If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.

NEW QUESTION 25
Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.
In this scenario, which configuration change will meet this requirement?

Change the load-balance-mode to source-ip-based.

Create a new static route with the internet sdwan-zone only

Configure the cost in each overlay member to 10.

Configure the priority in each overlay member to 10.

NEW QUESTION 26
On a FortiGate Configured in Transparent mode, which configuration option allows you to control Multicast traffic passing through the?

NEW QUESTION 27
You must analyze an event that happened at 20:37 UTC. One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled
* The FortiGate is at GMT-1000.
* The FortiAnalyzer is at GMT-0800
* Your browser local time zone is at GMT-03.00
You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

20:37:08

10:37:08

17:37:08

12.37:08

NEW QUESTION 28
A customer with a FortiDDoS 200F protecting their fibre optic internet connection from incoming traffic sees that all the traffic was dropped by the device even though they were not under a DoS attack. The traffic flow was restored after it was rebooted using the GUI. Which two options will prevent this situation in the future? (Choose two)

Change the Adaptive Mode.

Create an HA setup with a second FortiDDoS 200F

Move the internet connection from the SFP interfaces to the LC interfaces

Replace with a FortiDDoS 1500F

NEW QUESTION 29
Which feature must you enable on the BGP neighbors to accomplish this goal?

Graceful-restart

Deterministic-med

Synchronization

Soft-reconfiguration

NEW QUESTION 30
Refer to the exhibits.

A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.

Devices connected directly to ports 3 and 4 can perform 802 1X authentication.

Ports 3 and 4 can be part of different switch interfaces.

Client devices must have 802 1X authentication enabled

The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a single switch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named “lan”, which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named “ssl-inspection”. The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address. Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware-switch-interfaces https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x-authentication

NEW QUESTION 31
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

FAC2 can only process requests when FAC1 fails.

FAC2 can have its HA interface on a different network than FAC1.

The FortiToken license will need to be installed on the FAC2.

FSSO sessions from FAC1 will be synchronized to FAC2.

NEW QUESTION 32
Refer to the exhibit.

A customer wants FortiClient EMS configured to deploy to 1500 endpoints. The deployment will be integrated with FortiOS and there is an Active Directory server.
Given the configuration shown in the exhibit, which two statements about the installation are correct? (Choose two.)

If no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay.

A client can be eligible for multiple enabled configurations on the EMS server, and one will be chosen based on first priority

You can only deploy initial installations to Windows clients.

You must use Standard or Enterprise SQL Server rather than the included SQL Server Express

The Windows clients only require “File and Printer Sharing0 allowed and the rest is handled by Active Directory group policy

NEW QUESTION 33
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

Use network-overlay id

Change advpn2 to IKEv1

Use local-id

Use peer-id

NEW QUESTION 34
Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

1 redundant packet for every 10 base packets

3 redundant packet for every 5 base packets

2 redundant packet for every 8 base packets

3 redundant packet for every 9 base packets

NEW QUESTION 35
You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)