[Oct 29, 2022] 100% Real & Accurate CWNA-108 Questions with Free and Fast Updates [Q39-Q57]

QUESTION 39
A Wi-Fi Alliance interoperability certificate indicates that a device is a/b/g/n certified. It further indicates one transmit and receive spatial stream for both the 2.4 GHz and 5.0 GHz bands. It further indicates support for both WPA and WPA2 Enterprise and Personal. Finally, it indicates support for EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 and PEAPv1/EAP- GTC.
Which one of the following statements is false?

QUESTION 40
What non-standard WLAN solution attempts to give a longer transmission windows to devices with higher data rates then devise with lower data rates?

QUESTION 41
When antenna gain is reported in dBI, the gain of the antenna is compared to what theoretical antenna?

QUESTION 42
You are tasked with performing a throughput test on the WLAN. The manager asks that you use open source tools to reduce costs. What open source tool is designed to perform a throughput test?

QUESTION 43
In a Wi-Fi client configuration utility, what feature is most likely to be user configurable?

QUESTION 44
In addition to throughput enhancements, what other improvements does a dual-band 802.11ac AP provide when compared with 802.11a/g APs? (Choose 2)

QUESTION 45
You are onsite with a client to perform a post-deployment site survey. When verifying a multiple channel VoWiFi deployment using a VoWiFi handset, which aspect is most important?

QUESTION 46
What common feature of MDM solutions can be used to protect enterprise data on mobile devices?

QUESTION 47
You are troubleshooting a client issue on a Windows laptop. The laptop can see and connect to 2.4 GHz APs, but is does not even see 5 GHz APs. While evaluating the issue, you determine that this problem is happening for all of the laptops of this model in the organization. Several other tablets connect on channel 48 and channel
52 in the same work areas. What is the likely problem?

QUESTION 48
During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?

QUESTION 49
In which plane of the three networking planes is an access point configured by a WLAN controlled?

QUESTION 50
What factors are likely to cause the greatest impact on the application layer throughput of an
802.11n client station in a 2.4 GHz HT BSS? (Choose 3)

QUESTION 51
Which one of the following frequency ranges is not specified for use by IEEE 802.11 radios as of
802.11-2012?

QUESTION 52
You are implementing a VHT-capable AP. Which one of the following channels is available in the
802.11ac amendment to the 802.11-2012 standard, which was not available in the standard before this amendment?

QUESTION 53
A standard PoE injector is use to power an access point requiring 802.3at. CAT6 cabling is in use. What is the maximum distance supported between the access point and the Ethernet switch with the use of a midspan power injector?

QUESTION 54
When an ACK frame is not received by the transmitting STA, what is assumed?

QUESTION 55
You are using a tool that allows you to see signal strength for all APs in the area with a visual representation. It shows you SSIDs available and the security settings for each SSID. It allows you to filter by frequency band to see only 2.4 GHz networks or only 5 GHz networks. No additional features are available. What kind of application is described?

QUESTION 56
When a STA has authenticated to an AP (AP-1), but still maintains a connection with another AP (AP-2), what is the state of the STA on AP-1?

QUESTION 57
To ease user complexity, your company has implemented a single SSID for all employees. However, the network administrator needs a way to control the network resources that can be accessed by each employee based in their department.
What WLAN feature would allow the network administrator to accomplish this task?