[May-2022] 300-610 Dumps Full Questions - CCNP Data Center Exam Study Guide [Q14-Q29] : Best Free Exam Guide : http://free.exams4sures.com

NEW QUESTION 14
Drag and drop the SAN components from the left onto the correct design considerations on the right.

NEW QUESTION 15
An engineer Installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized. Which two elements should be used in this environment? (Choose two.)

eight twinax cables from each I/O module to each fabric interconnect

four twinax cables from each I/O module to each fabric Interconnect

Cisco UCS VIC 1225

Cisco UCS M81KR

Cisco UCS VIC 1280

NEW QUESTION 16
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?

Ethernet adapter

vNIC placement

LAN connectivity

Dynamic vNIC connection

NEW QUESTION 17
Drag and drop the technologies from the left onto the correct descriptions on the right.

NEW QUESTION 18
Which two methods mitigate congestion in a SAN network? (Choose two.)

Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.

Use the port-monitor command to detect slow drain devices.

Configure the port channel to enable individual buffer-to-buffer credits.

Configure the port monitor to allow categorization of a specific device as slow.

Configure the flow control for the FC to use R_RDY.

NEW QUESTION 19
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?

end host

switch

NPIV

Fibre Channel

NEW QUESTION 20
Drag the requirements from the left onto the correct policy types on the right.

NEW QUESTION 21
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented. Which automation tool should be used to meet these requirements?

Phython

Bash

YAML

Perl

NEW QUESTION 22
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)

UCS B200

Gigabit Ethernet Switch

Fabric Interconnect 6300

HX240c

HX220c

NEW QUESTION 23
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.
Which solution should be included in the design?

head-end replication

PIM sparse mode

PIM dense mode

ingress replication

NEW QUESTION 24
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?

Virtual Port Channel

Enhanced Virtual Port Channel

Virtual Port Channel Plus (vPC+)

Back-to-Back Virtual Port Channel

NEW QUESTION 25
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

NEW QUESTION 26
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?

Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches

Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches

NEW QUESTION 27
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

NEW QUESTION 28
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company. Which data center technology is recommended to achieve this goal?

OTV

VXLANEVPN

FabricPath

EoMPLS

NEW QUESTION 29
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?

Python

Bash

Perl

YAML

[May-2022] 300-610 Dumps Full Questions - CCNP Data Center Exam Study Guide [Q14-Q29]

2. Compute Design